Taulman 3D T-Glase blue 1.75mm filament is a high quality polyethylene terephthalate polymer. T-Glase is a high-strength polymer meant for industrial applications. The major advantage of T-Glase to all other polymers is layer to layer bonding, essential for a precision 3D print. T-Glase has a very low shrinkage factor and is best printed on acrylic or glass print beds. Due to it’s chemical makeup, light transitions easily along the path of the printed thread, making this an ideal choice for designers. Each roll of Taulman T-Glase filament contains 1 lb of material.
T-Glase was developed specifically by taulman3D to provide three major features to 3D Printing. Low shrinkage, Higher strength than ABS and aesthetics beyond ABS and PLA due to its enhanced optical properties.
T-Glase – Potential Uses As a replacement for any parts currently printed using ABS T-Glase is 100% bonding layer to layer and parts will never “split” apart or “de-laminate” even in very large prints. Glass like qualities Light Pipe capable Glass clear when used with clear epoxies. Crystal like reflections of the surface. Red, Green, Blue and Black are translucent. Now in Opaque White for a white that has a super gloss surface. “Non-shattering” parts upon over-stress Architectural Components. Jewelry Gaming pc’s Light catching designs of any type.
T-Glase – Printing Recommended Print Temperature: 238C – 245C Nozzle Diameter: Any size Print Speed: ABS speeds Print Bed Technique –Hot: Glass heated to 45C with thin coat of PVA Print Bed Technique – Cold: Not recommended